RCPlanet
INTEGY FUEL COOLER MONSTER TRUCK SCALE NITRO ENGINE INTC22622BLUE
, Length:, 65.3mm (2.6"), Diameter:, 10mm (0.39"), ,
Integy fuel cooler is constructed of blue anodized aluminum. Fins ...RCPlanet
HPI ENGINE PLATE 3.0MM GRAY HPI86080
, Length:, 105mm (4.13"), Width:, 79mm (3.11"), Thickness:, 3mm (0.12"), ,
HPI Racing motor plate for the Savage XL. The motor ...RCPlanet
ASSOCIATED 1/8 FT RC8T TRUGGY CHAMPIONSHIP EDITION KIT ASC80912
, Power Source:, Nitro, Terrain:, Off-Road, Body Style:, Truck, Scale Size:, 1/8 Scale, Assembly Level:, Kit, Length:, 555mm (21.85in), Width:, 410mm (16.14in), Wheelbase:, 375mm (14.76in), Weight:, 9.33 lbs (4230g), Gear Ratio:, 4.30:1, Drive:, 4WD, Note:, This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required., ,
This is the Team Associated 1/8 scale FT RC8T Truggy ...RCPlanet
TRAXXAS TRX PRO .15 SHORT CRANK TRA4004
| left to right | 31mm (1-1/4") |
| front to back | 11mm (7/16") |
, Width (cylinder head):, 41mm (1-1/2"), Mount holes (center to center):, Mount holes (center to center):, Overall Length (front end of shaft to back of engine):, 83mm (3.25"), Height (top of cylinder head to bottom of backplate):, 93mm (3-5/8"), Overall width of mounting ears (where the holes are):, 40mm (1-9/16"), Note:, Traxxas engines run much hotter than other engines (O.S., ASP, Thunder Tiger, etc) Because of their running temperature, Traxxas recommends using their Top Fuel (#TRAP5010) and their glow plug (#TRAG3230) to run the engine cooler., ,
This is the Traxxas TRX Short Crank Pro .15 Engine. ...RCPlanet
THUNDER TIGER EB-4 S2.5 4WD 1/8 .21 NITRO 2.4G IFHSS BLUE TTR6227-F102
, Vehicle, Length:, 15.5" (394mm), Width:, 8.8" (224mm), Wheelbase:, 12.4 - 12.6" (315mm - 320mm), Weight:, 6.8lbs (3100g) with engine, tuned pipe and servos, Front Caster:, Adjustable from 18 - 25 degrees, Rear Toe-In:, 1, 2 or 2.5 degrees, Front Track:, Adjustable from 11.6 - 12.6" (295 - 320mm), Rear Track:, 12" (300mm) distance from outer edges of wheels side-to-side, Body, Length:, 15.1" (385mm), Width:, 8.3" (211mm), Height:, 4" (102mm), Tires, Width:, 1.6" (40mm), Diameter with foam inserts:, 4.3" (110mm), Wheels, Width:, 1.6" (40mm), Diameter:, 3.1" (79mm), ,
This is the 1/8 scale Thunder Tiger EB-4 S2.5 4WD ...RCPlanet
THUNDER TIGER PRO .46 BB ABN W/MUFFLER TTR9141
| Break-In | 11x5 |
| Sport and Scale | 10.5x6, 11x6 |
| Aerobatic | 10x6.5, 10.5x6, 11x5 |
, Displacement:, .455 cu in (7.46cc), Bore:, .853" (21.8mm), Stroke:, .7874" (20mm), Power Output:, 1.43 HP @ 16,000 RPM, Maximum RPM range:, 2,000 - 17,000 RPM, Practical RPM range:, 2,500 - 14,000 RPM, Weight (w/muffler):, 17.01oz (482g), Crankshaft thread size:, 1/4-28, Crankcase width (for engine mount):, 1.36", Exhaust mounting width (center to center):, 37mm, Overall height:, 3.4" (87mm), Overall width (w/mount flanges):, 1.97" (50mm), Overall length (backplate to front of drive washer):, 3.39" (86mm), Recommended prop size:, Recommended prop size:, Recommended prop size:, ,
Thunder Tiger Pro Series engines are equipped with twin ball ...RCPlanet
TOP FLITE F4U CORSAIR GIANT SCALE KIT TOPA0410
, Scale:, 1/5.75, Wingspan:, 86.5", Wing Area:, 1344.5 square inches, Fuselage Length:, 67", Weight (w/radio):, 24-26 lbs, Wing Loading:, 41-44.5 oz/ft, Airfoil:, Fully-Symmetrical Low-Wing (Gull-Style), Center of Gravity:, 5-3/4" aft of LE inverted at fuse with gear down, Control Throws, High Rate, Elevator:, ¾" each, Rudder:, 2½" each, Ailerons:, 1" each, Flaps:, 1½", Low Rate, Elevator:, ½" each, Rudder:, 2½" each, Ailerons:, ¾" each, Incidences, Stab:, 0°, Wing:, 0°, Engine:, 0° down 3° right, Washout:, 2° at tip, ,
Top Flite F4U Corsair-or "Sweetheart of Okinawa"-remained in production from ...RCPlanet
TRAXXAS ALUMINUM EXHAUST HEADER SILVER ANODIZED REVO TRA5340
, Length:, 59mm (2.32"), Pipe diameters:, Outside-13mm (.52"), Pipe diameters:, Inside -10mm (.40"), Width between engine exhaust mount holes:, 22mm (.866"), ,
Traxxas exhaust header for the Revo. Constructed of silver aluminum. ...RCPlanet
RPM LOSI LST/LST2 HEAD GUARD BLACK RPM73252
The RPM Head Guard has only been tested and guaranteed to fit stock Losi LST Mach .26 & LST2 Mach 427 engine heads., ,
RPM LST / LST2 Head Guard has a uniquely designed ...RCPlanet
RPM HEAD GUARD TRAXXAS 2.5 RPM80505
, There are many manufacturers producing aftermarket heads that fit the Traxxas 2.5 & 2.5R engine but the RPM Head Guard has only been tested and guaranteed., , ,
RPM head protector has an additional 0.100"? or almost 1/8"? ...RCPlanet
PHOENIX MODELS FUSELAGE STREGA .40 PMMA5086
, Length:, 39.25" (997mm) including engine mount, ,
This is the Phoenix Models Fuselage for the Strega .40 ...RCPlanet
PHOENIX MODELS FUSELAGE SEA BEE .40-.46 PMMA5126
, Length:, 44.5" (1130mm) including engine mount, ,
This is the Phoenix Models Fuselage for the Sea Bee ...RCPlanet
PHOENIX MODELS FUSELAGE FUNSTAR 3D PMMA5026
, Length:, 42.75" (1086mm) including engine mount, ,
This is the Phoenix Models Fuselage for the Funstar 3D ...RCPlanet
KYOSHO GP- DRX KYOSHO DEMON KYO31053B
, Length:, 563mm, Width:, 260mm, Total height:, 187mm, Wheelbase:, 316mm, Tread (F / R):, 215mm / 215mm, Tires (F / R):, 93 × 38mm/93 × 38mm, Gear Ratio:, 8.86:1, All-up weight:, About 2,600 g, Engine:, 18 GXR with recoil starter, ,
This is the Kyosho GP- DRX Kyosho Demon. The 1/9 ...RCPlanet
KYOSHO GP CURTISS P40 WARHAWK 40 ARF AIRPLANE KYO11822LB
, Length:, 1,182mm, Width:, 1,422mm, Weight:, 2,400 ~ 2,500g (approx.), Wing Area:, 34.3dm2, Wing Load:, 69.9 ~ 74.3g/dm2 (approx.), Wing Type:, Original Full Symmetrical, Dihedral:, 0°, Engine:, 2-cycle 46~50 class, 4-cycle 52~53-class, ,
This is the Kyosho CURTISS P40 Warhawk 40 ARF Gas ...